The Importance of Colors of Underground Utility Lines

It is now easier to know what an underground utility line is for. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. Today, the risks have been lessened although not completely eliminated. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. You dont want something disastrous to occur. The worst thing that can happen if lines are not identified is that fatal injuries can happen. Services in the area where the lines are located can experience interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.

But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

There are certain colors that mark different utility lines for easy identification. Here are the colors used for different utilities.

If you see white lines, then these are proposed excavation sites. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. This color is appropriate for electrical works since it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. If you see blue lines then these are lines for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

Click here now if you want to learn more about the color coding of utility lines. Click here for more.